StripIt Finish Remover is an environmentally friendly, water-based stain and finish remover for exterior and interior use on log homes. StripIt removes multiple layers of finish in one application. StripIt will not harm chinking or sealants. StripIt will not darken or discolor the wood, and will not raise the grain.
StripIt Finish Remover is an environmentally friendly, water-based stain and finish remover for exterior and interior use on log homes. Stripit removes multiple layers of finish in one application. StripIt will not harm chinking or sealants. StripIt will not darken or discolor the wood, and will not raise the grain.
StripIt is non-flammable, biodegradable and practically odor free. StripIt does not contain any hazardous methylene chloride, methanol, caustic or petroleum solvents. In addition to its use on log homes, StripIt can also be used on other surfaces, including concrete, brick, stone, metal, and fiberglass.
StripIt Finish Remover features include:
Application Guide:
Application temperature: 40° F to 90° F
Application method: Safety equipment; airless sprayer, brush or roller; paint scraper; rags; and pressure washer capable of generating at least 500 to 600 psi.
Surface preparation: Dirt free
Special instructions: Apply from bottom-up; rinse from top-down
One to two applications, depending on severity
Rinse surface thoroughly after finish is removed
Clean up: Soap and water
Coverage rate: 45-55 sq. ft. per gallon